A286(SUH660Equivalent)
Characteristics
In JIS, A286 is a precipitation-hardenable austenitic heat resisting steel equivalent to SUH660. Its excellent strength and corrosion resistance in high-temperature environments of up to 700°C make it perfect for low stress applications. It is used as materials for rotors, bolts, blades, shafts, and other parts of a gas turbine and steam turbine.
It is non-magnetic and is also fit for applications requiring ductility in cryogenic environments as low as -196°C.
Stock Form and Sizes
◆1000mm ◎2000mm ▲3000mm ■3500mm ●4000mm ★2500mm~3990mm
Peeled round bars A286(AMS5732)Specification:ASTM A453 B&D /A638 Type2、ASME SA453 B /SA638 Type2、AMS5732、GE S-400、GE S-1000、NACE MR0175/MR0103
size 10〜28 | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
8 | 10 | 13 | 15 | 16 | 17 | 18 | 19 | 20 | 22 | 24 | 25 | 26 | 27 | 28 |
★ | ★ | ★ | ★ | ★ | ★ | ★ | ★ | |||||||
size 30〜55 | ||||||||||||||
30 | 32 | 33 | 35 | 36 | 38 | 40 | 42 | 44 | 45 | 46 | 48 | 50 | 55 | 60 |
★ | ★ NEW | ★ | ★ NEW | ★ | ★ NEW | ★ | ★ | ★ | ★ | |||||
size 65〜170 | ||||||||||||||
65 | 70 | 75 | 80 | 85 | 90 | 95 | 100 | 110 | 120 | 130 | 140 | 150 | 160 | 170 |
★ | ★ | ★ | ★ | ★ | ★ | ★ | ★ | ★ | ★ | |||||
size 180〜200 | ||||||||||||||
180 | 190 | 200 | ||||||||||||
Peeled round bars A286(AMS5737)Specification:ASTM A453 B&D /A638 Type1、ASME SA453 B /SA638 Type1、AMS5737、GE S-400、GE S-1000
size 10〜28 | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
8 | 10 | 13 | 15 | 16 | 17 | 18 | 19 | 20 | 22 | 24 | 25 | 26 | 27 | 28 |
★ NEW | ★ NEW | ★ NEW | ★ NEW | ★ NEW | ★ NEW | |||||||||
size 30〜55 | ||||||||||||||
30 | 32 | 33 | 35 | 36 | 38 | 40 | 42 | 44 | 45 | 46 | 48 | 50 | 55 | 60 |
★ NEW | ★ NEW | ★ NEW | ★ NEW | ★ NEW | ★ NEW | ★ NEW | ||||||||
size 65〜170 | ||||||||||||||
65 | 70 | 75 | 80 | 85 | 90 | 95 | 100 | 110 | 120 | 130 | 140 | 150 | 160 | 170 |
★ NEW | ★ NEW | ★ NEW | ||||||||||||
size 180〜200 | ||||||||||||||
180 | 190 | 200 | ||||||||||||
Chemical composition
Ni | Cr | Fe | C | Mn | Si | Co | P | S | Mo | Cu | N | Nb | Ta | Nb+Ta | W | V | other | |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
min | 24.00 | 13.50 | 1.00 | 0.10 | Ti: 1.90-2.35 Al: Max 0.35 B: 0.003-0.010 | |||||||||||||
max | 27.00 | 16.00 | 0.08 | 2.00 | 1.00 | 1.00 | 0.025 | 1.50 | 0.50 | 0.50 |
※Above is standard values of AMS5732. For further information, please contact us.
Mechanical properties
A286(AMS5732)
Tensile Strength Mpa | 0.2% Yield Strength Mpa | Elongation % | Reduction of Area % | Hardness | |
---|---|---|---|---|---|
min | 896 | 586 | 15 | 20 | HB248 |
max | HB341 |
A286(AMS5737)
Tensile Strength Mpa | 0.2% Yield Strength Mpa | Elongation % | Reduction of Area % | Hardness | |
---|---|---|---|---|---|
min | 965 | 655 | 12 | 15 | HB277 |
max | HB363 |
※Above is standard values of AMS5732. For further information, please contact us.
International Specification Comparison chart
Material | Round bars | Plates/Sheets | Pipes/Tubes | ||
---|---|---|---|---|---|
Seamless | Welded | ||||
JIS | SUH660 | G4311 | G4312 | ||
ASTM | S66286 | A453/A638 | |||
ASME | S66286 | SA453/SA638 | |||
DIN/EN | 1.4980 |
- Disclaimer
- All the information on this website is published in good faith and for general information purpose only and not for technical design purposes. We do not make any warranties about the completeness, reliability and accuracy of this information. Any action you take upon the information on our website is strictly at your own risk. and we will not be liable for any losses and damages in connection with the use of our website.