SUS440C
Characteristics
SUS440C is a high-carbon martensitic stainless steel with high strength, proper corrosion resistance, and good hardness and wear resistance.
Stock Form and Sizes
◆1000mm ◎2000mm ▲3000mm ■3500mm ●4000mm ★2500mm~3990mm
Cold finished round barsSpecification:JIS G4318
size 2〜8 | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
2 | 2.5 | 3 | 3.5 | 4 | 4.4 | 5 | 5.3 | 5.5 | 6 | 6.35 | 7 | 7.1 | 8 | 8.4 |
◎ 3.2 | ◎ 4.2 | ◎ 5.2 | ◎● 6.2 | ◎● 7.2 | ● 8.2 | |||||||||
size 8〜15 | ||||||||||||||
8.95 | 9 | 9.52 | 10 | 10.8 | 11 | 11.3 | 12 | 12.7 | 13 | 14 | 14.3 | 14.6 | 15 | 15.87 |
● 9.2 | ● 10.2 | ● 12.2 | ● 13.2 | ● 14.2 | ||||||||||
size 16〜24 | ||||||||||||||
16 | 16.3 | 17 | 17.3 | 18 | 18.3 | 19 | 20 | 20.3 | 21 | 22 | 22.2 | 23 | 23.3 | 24 |
size 25〜42 | ||||||||||||||
25 | 26 | 27 | 27.62 | 28 | 30 | 30.6 | 32 | 33 | 33.3 | 34 | 35 | 36 | 38 | 40 |
size 45~50 | ||||||||||||||
42 | 45 | 48 | 50 | |||||||||||
Chemical composition
Ni | Cr | Fe | C | Mn | Si | Co | P | S | Mo | Cu | N | Nb | Ta | Nb+Ta | W | V | other | |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
min | 16.00 | 0.95 | ||||||||||||||||
max | (0.60) | 18.00 | 1.20 | 1.00 | 1.00 | 0.040 | 0.030 | (0.75) |
( )% max may be added.
Mechanical properties
Soft Annealed
Tensile Strength N/mm² | 0.2% Yield Strength N/mm² | Elongation % | Reduction of Area % | Hardness | |
---|---|---|---|---|---|
min | |||||
max | HB269 |
Quench and Tempered
Tensile Strength N/mm² | 0.2% Yield Strength N/mm² | Elongation % | Reduction of Area % | Hardness | |
---|---|---|---|---|---|
min | HRC58 | ||||
max |
※Above is standard values of JIS G4303. For further information, please contact us.
International Specification Comparison chart
Material | Round bars | Plates/Sheets | Pipes/Tubes | ||
---|---|---|---|---|---|
Seamless | Welded | ||||
JIS | SUS440C | G4303/G4318 | G4304 | ||
ASTM | S44004 | A182/A276/A479 | A240 | ||
ASME | S44004 | SA182/SA276/SA479 | SA240 | ||
DIN/EN | 1.4125 |
- Disclaimer
- All the information on this website is published in good faith and for general information purpose only and not for technical design purposes. We do not make any warranties about the completeness, reliability and accuracy of this information. Any action you take upon the information on our website is strictly at your own risk. and we will not be liable for any losses and damages in connection with the use of our website.