SUS430
Characteristics
SUS430 is a ferritic stainless steel with exceptional resistance to corrosion and combustion. Because of its high corrosion resistance and machinability, the material is used in ornamental applications for structures, kitchens, etc. Its hardness can be improved to an appropriate level by cold working, but the material cannot be hardened by heat treatment.
Stock Form and Sizes
◆1000mm ◎2000mm ▲3000mm ■3500mm ●4000mm ★2500mm~3990mm
Chemical composition
Ni | Cr | Fe | C | Mn | Si | Co | P | S | Mo | Cu | N | Nb | Ta | Nb+Ta | W | V | other | |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
min | 16.00 | |||||||||||||||||
max | (0.60) | 18.00 | 0.12 | 1.00 | 0.75 | 0.040 | 0.030 |
( )% max may be added.
Mechanical properties
Tensile Strength N/mm² | 0.2% Yield Strength N/mm² | Elongation % | Reduction of Area % | Hardness | |
---|---|---|---|---|---|
min | 450 | 205 | 22 | 50 | |
max | HB183 |
※Above is standard values of JIS G4303. For further information, please contact us.
International Specification Comparison chart
Material | Round bars | Plates/Sheets | Pipes/Tubes | ||
---|---|---|---|---|---|
Seamless | Welded | ||||
JIS | SUS430 | G4303/G4318 | G4304/G4305 | ||
ASTM | S43000 | A182/A276/A479 | A240 | ||
ASME | S43000 | SA182/SA276/SA479 | SA240 | ||
DIN/EN | 1.4016 |
- Disclaimer
- All the information on this website is published in good faith and for general information purpose only and not for technical design purposes. We do not make any warranties about the completeness, reliability and accuracy of this information. Any action you take upon the information on our website is strictly at your own risk. and we will not be liable for any losses and damages in connection with the use of our website.