S32760
Characteristics
S32760 is a super duplex stainless steel with an outstanding corrosion resistance in a wide range of applications—especially at critical pitting temperatures over 50°C. The material is resistant to pitting and crevice corrosion in the environments containing seawater and other chlorides, and is known to have high strength and a long life-cycle.
Stock Form and Sizes
◆1000mm ◎2000mm ▲3000mm ■3500mm ●4000mm ★2500mm~3990mm
Peeled round barsSpecification:ASTM A182/A276/A479、ASME SA182/SA276/SA479、NACE MR0175/MR0103、NORSOK M630 D57、EN 1.4501
Size 5〜24 | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
5 | 6 | 8 | 10 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 22 | 24 |
★ 12.7 | ★ 15.88 | ★ 19.05 | ★ 22.22 | |||||||||||
Size 25〜46 | ||||||||||||||
25 | 26 | 27 | 28 | 30 | 32 | 33 | 35 | 36 | 38 | 40 | 42 | 44 | 45 | 46 |
★ | ★ 28.57 | ★ | ★ 31.75 | ★ | ★ 38.1 | ★ | ★ | |||||||
Size 48〜130 | ||||||||||||||
48 | 50 | 55 | 60 | 65 | 70 | 75 | 80 | 85 | 90 | 95 | 100 | 110 | 120 | 130 |
★ | ★ | ★ | ★ | ★ | ★ | ★ | ★ | ★ 101.6 | ★ | ★ | ★ | |||
Size 140〜350 | ||||||||||||||
140 | 150 | 160 | 170 | 180 | 190 | 200 | 210 | 230 | 250 | 280 | 300 | 330 | 350 | |
★ | ★ | ★ | ★ 203.2 | ★ | ★ |
Chemical composition
Ni | Cr | Fe | C | Mn | Si | Co | P | S | Mo | Cu | N | Nb | Ta | Nb+Ta | W | V | other | |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
min | 6.0 | 24.0 | 3.0 | 0.50 | 0.20 | 0.50 | ||||||||||||
max | 8.0 | 26.0 | 0.030 | 1.00 | 1.00 | 0.030 | 0.010 | 4.0 | 1.00 | 0.30 | 1.00 |
※Above is standard values of ASTM A276. For further information, please contact us.
Mechanical properties
Tensile Strength Mpa | 0.2% Yield Strength Mpa | Elongation % | Reduction of Area % | Hardness | |
---|---|---|---|---|---|
min | 750 | 550 | 25 | ||
max | HB290 |
※Above is standard values of ASTM A276. For further information, please contact us.
International Specification Comparison chart
Material | Round bars | Plates/Sheets | Pipes/Tubes | ||
---|---|---|---|---|---|
Seamless | Welded | ||||
JIS | |||||
ASTM | S32760 | A182/A276/A479 | A240 | A312 | A312 |
ASME | S32760 | SA182/SA276/SA479 | SA240 | SA312 | SA312 |
DIN/EN | 1.4501 |
- Disclaimer
- All the information on this website is published in good faith and for general information purpose only and not for technical design purposes. We do not make any warranties about the completeness, reliability and accuracy of this information. Any action you take upon the information on our website is strictly at your own risk. and we will not be liable for any losses and damages in connection with the use of our website.