ALLOY B2 (Hastelloy B2)

Characteristics

ALLOY B2 is a corrosion-resistant, solid-solution Ni-Mo alloy.

  • • controlled chemistry with a minimum iron and chromium content to retard the formation of ordered -phase Ni4Mo
  • • significant corrosion resistance to reducing environments
  • • excellent resistance to medium-concentrated sulphuric acid and a number of non-oxidizing acids
  • • good resistance to chloride-induced stress-corrosion cracking (SCC)
  • • good resistance to a wide range of organic acids
Density9.24

Stock Form and Sizes

※ ◆1000㎜ ◎2000㎜ ▲3000㎜ ■3500㎜ ●4000㎜ ★2500㎜~3990㎜

Round barsSpecification: ASTM B335/B564※ ASME SB335/SB564※ ※B564/SB564 Apply to Forged Bar Only
size 1〜13
1.21.622.633.544.455.367.188.95101213
               
size 16〜50
1618192022242528303235363840424550
      
size 55〜135
556065707580859095100105110115120125133135
       
size 140〜330
140145150155160165170180190200210220230250280300330
           
size 350

Contact us

Sourceable Ex-Stock Material for other Forms from Distributors World-Wide

EquivalentRound BarsPlatePipe/TubeWelding Rod & Wire
MinMax MinMax
HastelloyB2/B310~203.2 0.53~31.8 ×

*○: Various sizes available in stock. △: Only limited sizes available in stock. ☆: Please contact us for more details.
*We can supply materials and products that comply with various standards including ASTM, ASME, AMS, and NACE standards. Please contact us for more details.

Contact us

Corrosion resistance

The extremely low carbon and silicon content of Alloy B2 reduces precipitation of carbides and other phases in the heat-affected zone of welds and ensures adequate corrosion resistance even in the welded condition.
Alloy B2 exhibits excellent corrosion resistance in aggressive reducing media such as hydrochloric acid in a wide range of temperatures and concentrations, as well as in medium-concentrated sulphuric acid even with limited chloride contamination. It can also be used in acetic and phosphoric acids. Optimum corrosion resistance can be obtained only if the material is in the correct metallurgical condition and exibits a clean structure.

Applications

ALLOYB2is used in a wide range of applications in the chemical process industry, especially for processes involving sulphuric, hydrochloric, phosphoric and acetic acid.

Chemical composition

 NiCrFeCMnSiCuMoCoPS
minbal.0.41.6    26.0   
max1.02.00.011.00.080.530.01.00.020.010

※The values in the table are for reference only and do not guarantee minimum or maximum values. For further information, please contact us.

Mechanical properties(Round Bar)

 ConditionYield Strength(Mpa)Tensile Strength(Mpa)Elongation(%)Hardness(HB)
ASTM Min ValueSolution Annealed35076040 
Typical Values at RTSolution Annealed41189260185

Above standard values and typical values of Round Bar.
Please contact us with any questions about reference or value of plate and pipe.
※The values in the table are for reference only and do not guarantee minimum or maximum values. For further information, please contact us.

International Standard Comparison Chart

 MaterialRound BarsPlates/SheetsPipe/Tube
SeamlessWelded
ASTMUNS
N10665
B335B333B622B619/B626
ASMESB335SB333SB622SB619/SB626
JISNW0665H4553H4551H4552 
DIN2.461717752177501775117751

Contact us

Disclaimer
All the information on this website is published in good faith and for general information purpose only and not for technical design purposes. We do not make any warranties about the completeness, reliability and accuracy of this information. Any action you take upon the information on our website is strictly at your own risk. and we will not be liable for any losses and damages in connection with the use of our website.

Stock list

CONTACT

OSAKA STAINLESS

Inquiry/Request for information

TEL 81-6-6586-5626
FAX 81-6-6586-5858

E-MAIL:info@osc21.co.jp

Business hours: 8:00 - 17:00(closed on Saturdays, Sundays and National Holidays)

Contact us