S32750
Characteristics
S32750 is a super duplex stainless steel designed for use in corrosive environments that require high strength. Because of its high content of molybdenum (Mo), chromium (Cr), and nitrogen (N), the material is highly resistant to pitting and crevice corrosion. It is also resistant to chloride-induced stress-corrosion cracking, erosion corrosion, corrosion fatigue, and general corrosions in acids.
Stock Form and Sizes
◆1000mm ◎2000mm ▲3000mm ■3500mm ●4000mm ★2500mm~3990mm
Peeled round barsSpecification:ASTM A182/A276/A479、ASME SA182/SA276/SA479、NACE MR0175/MR0103、NORSOK M630 D57、EN 1.4410
Size 5〜24 | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
5 | 6 | 8 | 10 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 22 | 24 |
★ (h9) | ★ (h9) | ★ (h9) | ★ (h9) | ★ | ★ | ★ | ||||||||
Size 25〜46 | ||||||||||||||
25 | 26 | 27 | 28 | 30 | 32 | 33 | 35 | 36 | 38 | 40 | 42 | 44 | 45 | 46 |
★ | ★ | ★ | ★ | ★ | ★ | ★ | ★ | ★ | ||||||
Size 48〜130 | ||||||||||||||
48 | 50 | 55 | 60 | 65 | 70 | 75 | 80 | 85 | 90 | 95 | 100 | 110 | 120 | 130 |
★ | ★ | ★ | ★ | ★ | ★ | ★ | ★ | ★ | ★ | ★ | ★ | ★ | ★ | |
Size 140〜350 | ||||||||||||||
140 | 150 | 160 | 170 | 180 | 190 | 200 | 210 | 230 | 250 | 280 | 300 | 330 | 350 | |
★ | ★ | ★ | ★ | ★ | ★ | ★ | ★ | ★ |
Chemical composition
Ni | Cr | Fe | C | Mn | Si | Co | P | S | Mo | Cu | N | Nb | Ta | Nb+Ta | W | V | other | |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
min | 6.0 | 24.0 | 3.0 | 0.24 | ||||||||||||||
max | 8.0 | 26.0 | 0.030 | 1.20 | 0.80 | 0.035 | 0.020 | 5.0 | 0.50 | 0.32 |
※Above is standard values of ASTM A276. For further information, please contact us.
Mechanical properties
Below 2″(50.8mm)
Tensile Strength Mpa | 0.2% Yield Strength Mpa | Elongation % | Reduction of Area % | Hardness | |
---|---|---|---|---|---|
min | 800 | 550 | 15 | ||
max | HB310 |
Over 2″(50.8mm)
Tensile Strength Mpa | 0.2% Yield Strength Mpa | Elongation % | Reduction of Area % | Hardness | |
---|---|---|---|---|---|
min | 760 | 515 | 15 | ||
max | HB310 |
※Above is standard values of ASTM A276. For further information, please contact us.
International Specification Comparison chart
Material | Round bars | Plates/Sheets | Pipes/Tubes | ||
---|---|---|---|---|---|
Seamless | Welded | ||||
JIS | |||||
ASTM | S32750 | A182/A276/A479 | A240 | A312 | A312 |
ASME | S32750 | SA182/SA276/SA479 | SA240 | SA312 | SA312 |
DIN/EN | 1.4410 |
- Disclaimer
- All the information on this website is published in good faith and for general information purpose only and not for technical design purposes. We do not make any warranties about the completeness, reliability and accuracy of this information. Any action you take upon the information on our website is strictly at your own risk. and we will not be liable for any losses and damages in connection with the use of our website.