SUS630 | Osaka Stainless

SUS630
SUS630(ST)/SUS630 H900/SUS630 H1025/SUS630 H1075/SUS630 H1150

Characteristics
Chemical composition
Mechanical properties
International Specification Comparison chart

Stock Form and Sizes
Cold finished round bars(ST)
Peeled round bars(ST)
Peeled round bars(H900)
Peeled round bars(H1025)
Peeled round bars(H1075)
Peeled round bars(H1150)
Hex bars(ST)

Characteristics

SUS630 is a precipitation hardening stainless steel with combustion resistance and corrosion resistance equivalent to SUS304, and high strength and hardness can be obtained by subjecting it to heat treatment. Because the aging process of SUS630 can be conducted at low temperatures, no large strain is likely to result, thus being used for applications such as a long shaft.

Density7.78

Stock Form and Sizes

◆1000mm ◎2000mm ▲3000mm ■3500mm ●4000mm ★2500mm～3990mm

SUS630Cold finished round bars(ST)Specification：JIS G4311

Size 2〜8
2	2.5	3	3.5	4	4.4	5	5.3	5.5	6	6.35	7	7.1	8	8.4
		◎		◎		◎			◎		◎		◎
Size 8〜15
8.95	9	9.52	10	10.8	11	11.3	12	12.7	13	14	14.3	14.6	15	15.87
	◎		●				●		●
Size 16〜24
16	16.3	17	17.3	18	18.3	19	20	20.3	21	22	22.2	23	23.3	24

Size 25〜42
25	26	27	27.62	28	30	30.6	32	33	33.3	34	35	36	38	40

Size 45～50
42	45	48	50

SUS630 Peeled round bars(ST)Specification：JIS G4303

Size 10〜27
10	12	13	14	15	16	17	18	19	20	22	24	25	26	27
			●		●			●	●	●	●	●	●
Size 28〜55
28	30	32	33	35	36	38	40	42	44	45	46	48	50	55
●	●	●			●	●	●	●		●		●	●	●
Size 60〜160
60	65	70	75	80	85	90	95	100	110	120	130	140	150	160
●	●	●	●	●	●	●	●	●	★	★	★	★	★	★
Size 170〜200
170	180	190	200
★	★	★	★

SUS630 H900 Peeled round barsSpecification：JIS G4303

Size 10〜27
10	12	13	14	15	16	17	18	19	20	22	24	25	26	27
● (h9)	● (h9)	● (h9)			●				●	●	●	●
Size 28〜55
28	30	32	33	35	36	38	40	42	44	45	46	48	50	55
●	●	●			●	●	●	●		●		●	●	●
Size 60〜160
60	65	70	75	80	85	90	95	100	110	120	130	140	150	160
●	●	●	●	●	●	●	●	●	★	★	★	★	★	★
Size 170〜200
170	180	190	200
★	★	★	★

SUS630 H1025 Peeled round barsSpecification：JIS G4303

Size 10〜27
10	12	13	14	15	16	17	18	19	20	22	24	25	26	27
● (h9)	● (h9)	● (h9)			●				●	●		●
Size 28〜55
28	30	32	33	35	36	38	40	42	44	45	46	48	50	55
● NEW	●	●			●	●	●	●		●		● NEW	●	●
Size 60〜160
60	65	70	75	80	85	90	95	100	110	120	130	140	150	160
●	●	●	● NEW	●	● NEW	●	● NEW	●	★	★	★	★	★
Size 170〜200
170	180	190	200

SUS630 H1075 Peeled round barsSpecification：JIS G4303

Size 10〜27
10	12	13	14	15	16	17	18	19	20	22	24	25	26	27
● (h9)	● (h9)	● (h9)			●				●	●		●
Size 28〜55
28	30	32	33	35	36	38	40	42	44	45	46	48	50	55
● NEW	●	●			●	●	●	●		●		● NEW	●	●
Size 60〜160
60	65	70	75	80	85	90	95	100	110	120	130	140	150	160
●	●	●	● NEW	●	● NEW	●	● NEW	●	★	★	★	★	★
Size 170〜200
170	180	190	200

SUS630 H1150 Peeled round barsSpecification：JIS G4303

Size 10〜27
10	12	13	14	15	16	17	18	19	20	22	24	25	26	27
● (h9)	● (h9)	● (h9)	● NEW		●				●	●	●	●
Size 28〜55
28	30	32	33	35	36	38	40	42	44	45	46	48	50	55
●	●	●			●	●	●	●		●		●	●	●
Size 60〜160
60	65	70	75	80	85	90	95	100	110	120	130	140	150	160
●	●	●	●	●	●	●	●	★	★	★	★	★	★	★
Size 170〜200
170	180	190	200
★	★	★	★

SUS630　Hex bars(ST)Specification：JIS G4303

Size 5〜24
5.5	6	7	8	10	11	12	13	14	17	19	21	22	23	24
				★			★		★	★		★		★
Size 26〜70
26	27	29	30	32	35	36	38	41	46	50	55	60	65	70
	★		★	★		★		★	★
Size 75〜80
75	80

Chemical composition

	Ni	Cr	Fe	C	Mn	Si	Co	P	S	Mo	Cu	N	Nb	Ta	Nb+Ta	W	V	other
min	3.00	15.00									3.00		0.15
max	5.00	17.50		0.070	1.00	1.00		0.040	0.030		5.00		0.45

※Above is standard values of JIS G4303. For further information, please contact us.

Mechanical properties

SUS630 ST

	Tensile Strength N/mm²	0.2% Yield Strength N/mm²	Elongation ％	Reduction of Area ％	Hardness
min
max					HB363

SUS630 H900

	Tensile Strength N/mm²	0.2% Yield Strength N/mm²	Elongation ％	Reduction of Area ％	Hardness
min	1310	1175	10	40	HB375
max

SUS630 H1025

	Tensile Strength N/mm²	0.2% Yield Strength N/mm²	Elongation ％	Reduction of Area ％	Hardness
min	1070	1000	12	45	HB331
max

SUS630 H1075

	Tensile Strength N/mm²	0.2% Yield Strength N/mm²	Elongation ％	Reduction of Area ％	Hardness
min	1000	860	13	45	HB302
max

SUS630 H1150

	Tensile Strength N/mm²	0.2% Yield Strength N/mm²	Elongation ％	Reduction of Area ％	Hardness
min	930	725	16	50	HB277
max

※Above is standard values of JIS G4303. For further information, please contact us.

International Specification Comparison chart

	Material	Round bars	Plates/Sheets	Pipes/Tubes
	Material	Round bars	Plates/Sheets	Seamless	Welded
JIS	SUS630	G4303/G4318	G4304/G4305
ASTM	S17400	A564	A693
ASME	S17400	SA564	SA693
DIN/EN	1.4542

Disclaimer: All the information on this website is published in good faith and for general information purpose only and not for technical design purposes. We do not make any warranties about the completeness, reliability and accuracy of this information. Any action you take upon the information on our website is strictly at your own risk. and we will not be liable for any losses and damages in connection with the use of our website.

Stock list

CONTACT

OSAKA STAINLESS

Inquiry/Request for information

TEL 81-6-6586-5626
FAX 81-6-6586-5858

E-MAIL：info@osc21.co.jp

Business hours: 8:00 - 17:00（closed on Saturdays, Sundays and National Holidays）